1, the floor to ensure dry: the most important thing is to ensure that dry. To ensure that the surface of the floor there are all the water in the trench dry, it can wax.Rainy day is too high, waxing will produce white muddy phenomenon. At room temperature below 5 degrees, the floor wax will be hardened. Before waxing, do not use a cloth containing chemicals to clean the floor, which can lead to poor adhesion of the floor wax.
2, clear the floor surface of the trash, dirt: with a vacuum cleaner to suck away the floor surface of the trash and dust, and then diluted with a neutral detergent to clean the floor stains, the stains can be difficult to remove the available satisfied that the water wipe. To prevent the accumulation of detergent in the groove, rags try to wring dry.
3, dry rag wipe: dry rag wipe the floor, especially the trench splicing Office, but also to be carefully wipe, do not leave detergent. If you are careless and there are residual detergent and water, it may cause the floor surface whitening, bulging.
4, waxing steps: shaking the floor wax container, stir well. Before waxing, you can try to find a local trial in the corners and other unobtrusive areas to confirm whether there is any abnormality. To prevent the floor polluting baseboard and furniture polluting, you can use tape, newspapers, etc. cover the protection of these parts. Dip the floor wax thoroughly with a clean rag so as not to drip. Do not pour the floor wax directly on the floor, this will produce traces of stains and circles marks, and then trouble.
According to the direction of the wood floor paint carefully, do not leak or uneven thickness. Too little amount will result in uneven shade, excessive application will lead to poor filming. Maintaining uniform thickness is the key to waxing. Do not dilute the floor wax with water. Waxing tools can be used waxing special MOP, easy to operate, the effect is ideal.